Knowledge

• 16/Dec2022

  Can shallow air flotation automatically adjust the water level?

  The purpose of automatic water level adjustment can be achieved by using shallow air flotation. This function is added to the equipment, and the scope of application of the equipment is relatively wid

• 14/Dec2022

  During the operation of the Shallow Air Flotation machine, the treatment of s...

  During the operation of the Shallow Air Flotation machine, the staff should observe the correct operation steps of the entire system at any time. Including the change of its water quality, whether it

• 12/Dec2022

  The details that should be paid attention to before and after the start-up of...

  Step 1: Before starting the Shallow Air Flotation machine, first check all the pipes and valves. There are many valves, so understand the function and role of each valve. Check to see if the places wh

• 09/Dec2022

  What are the ways to improve the water quality and cleanliness in the operati...

  In the current production process, many enterprises will inevitably remove a large amount of waste water and waste residue. In this case, we need to do a good job in environmental protection and not c

• 07/Dec2022

  What is the reason for the poor treatment effect of shallow air flotation

  Reason 1: The releaser is blocked In the process of using shallow air flotation equipment, it is still necessary to do a good job of daily inspection of the equipment, mainly because once the equipmen

• 05/Dec2022

  What should be paid attention to when using shallow air flotation process for...

  In the sewage treatment process, shallow air flotation, a traditional process, is in an indispensable position, especially for fine particle suspensions whose specific gravity is close to that of wate

• 03/Dec2022

  The difference between shallow air flotation machine and dissolved air flotat...

  1. When the dissolved air flotation machine is installed, because the equipment is still and the water moves, the pool depth is generally 2.0~2.5m. After the water enters the contact area from the rev

• 01/Dec2022

  Shallow air flotation debugging process

  1. At the initial stage of biofilm cultivation, water is taken through a small load, so that the surface of the filler layer is gradually covered with membrane-like sludge. 2. During the trial operati

• 30/Nov2022

  What are the common failures of Shallow Air Flotation machines and how to dea...

  1. If abnormal problems are found in the electrical system of the Shallow Air Flotation machine, electrical maintenance personnel should be asked to check and deal with it referring to the "Electrical

• 28/Nov2022

  What preparations do Shallow Air Flotation equipment need to do before instal...

  Installation points of soluble gas float: (1) The electrical box that dissolves the air flotation in the air flotation should be placed on the side of the escalator, and the environment should be clea