During the operation of the Shallow Air Flotation machine, the staff should observe the correct operation steps of the entire system at any time. Including the change of its water quality, whether it needs to add medicine, how much medicine needs to be added, whether the water volume of the container is in a suitable position, whether the water inlet position is reasonable, etc. Only by confirming these can the overall water quality be guaranteed.
Another problem is the dross situation. In the process of water quality evolution, there will inevitably be a lot of scum in the water quality, and these scum should go to the right place. We should learn to control the water outlet of the Shallow Air Flotation machine. The position of the entire scum liquid needs to be within the sludge discharge standard before it can be discharged. If it cannot be drained, it may be scratched. In short, it is necessary to ensure that these dross are removed in time, otherwise it is easy to block and cause subsequent machines to fail to operate normally.
For the air flotation of the Shallow Air Flotation machine, not only the problem of water intake, but also the problem of drainage should be paid attention to. A balance needs to be ensured and it cannot be broken. The whole system can work normally within the controllable range. For example, medicine supply, power supply, or timely disposal of waste, in fact, these are all to maintain the dynamic balance of the entire system. Only by keeping every part of the equipment in a normal state of motion can the subsequent treatment effects be balanced. This is also the experience and lessons that many people have learned from solving Shallow Air Flotation machine failures.
