Reason 1: The releaser is blocked
In the process of using shallow air flotation equipment, it is still necessary to do a good job of daily inspection of the equipment, mainly because once the equipment releaser is blocked, large air bubbles will easily appear in the air flotation contact area, which will directly The impact on the scum in the sewage will especially cause the scum to lose its original stability and cause the water quality to be turbid, so the effect will be affected when the suspended matter is treated.
Reason 2: Moving too fast
Shallow air flotation equipment needs to scrape slag during the start-up operation, but if the moving speed is relatively fast, it will cause the scum in the lower layer of sewage to be easily broken, and even some turbulent flow will occur , so if the scraping slag is not treated in time, it will also affect the treatment effect, so it should be adjusted according to the actual use needs when using, so that the equipment can operate within a suitable speed range.
Shallow air flotation equipment can indeed solve the problem of suspended solids in sewage, but in the process of use, if there is a situation where the application effect is relatively poor, you can choose to consider such major reasons and solve it through the correct method , so as to ensure the use of equipment, especially the treatment of suspended solids in sewage.






