Step 1: Before starting the Shallow Air Flotation machine, first check all the pipes and valves. There are many valves, so understand the function and role of each valve. Check to see if the places where all containers need to be watered have been watered normally, and the water level for general watering is also needed. There is also the case of electrical equipment, each component and electrical equipment needs to be in a normal state to start.
Step 2: After starting the Shallow Air Flotation machine, several important configurations must be made, including flocculants and reagents. Different specifications and quantities need to be known in advance. When all the ratios meet certain requirements, the mixing system can be turned on. Then you can start breathing. When taking in air, the pressure needs to be adjusted to an appropriate angle so that the air intake valve meets the relevant requirements.
Step 3: During the use of the Shallow Air Flotation machine, keep abreast of the pump condition. The water pump needs to see the water inlet. The water inlet position is generally one-third of the entire gas dissolving tank, and the entire pressure also needs to meet certain specifications. Generally, the water pump system of the Shallow Air Flotation machine can only be started after the whole water pump works normally for 3 minutes.
