Start-up and performance introduction of air flotation machine

The startup process of the air flotation machine is as follows. We must first transfer the compressed air from the air compressor or the compressed air to the dissolved air pipe, and then open the ball valve of the air filter. Then adjust the pressure reducing valve, open the dissolved air balloon valve, and adjust the air flow. It is also necessary to open the reflux pump again and check the inlet and outlet pressures of the dissolved air pipe. Generally speaking, the inlet pressure is 0.53-0.58MPa, and the outlet pressure is 0.45-0.52MPa. Then close the 6 exhaust valves of the air flotation. Turn on the driver and let it run.
The air flotation machine can remove grease and suspended solids from industrial and urban sewage, and then add some flocculant for cleaning. It can effectively treat sewage in industry and is generally used in electroplating, prevention, food and other industries. It can also pretreat original water.