What should be paid attention to when debugging and using an air flotation machine?

Before debugging the air flotation machine, we need to clean the impurities in the water tank. After cleaning, we need to lubricate the air compressor and water pump with lubricant, then turn on the power, turn on the air pump, and check if the direction of rotation is consistent with the direction of the arrow. Similarly, we can manually control the air compressor, check its operation, and finally adjust the dosing equipment.
Before installing the air flotation machine, it can operate overhead. However, for stability reasons, air flotation equipment can also establish concrete foundations. Then it is necessary to clean the sewer or connect the regulating tank with a pipeline to better clean the air flotation tank. The clean water outlet should be connected to the clean water tank or corresponding sewer equipment, and finally the electrical box should be placed on the side of the escalator.
Many people may not know much about air flotation machines, but for manufacturers and customers who use them frequently, it is important to understand their usage requirements, technical requirements, and maintenance.
The use of air flotation machines requires a special water tank, which requires a shallow water tank, which will reduce the effective air flotation time. In order to improve work efficiency, air flotation must be used efficiently in a short period of time. In this way, the operating rate will double. The air flotation dissolved gas tank has been specially designed to reduce its volume, but the dissolved gas effect remains unchanged. Air flotation can operate continuously, including in the pool bottom area, and can remove dirt on the scraper near the pool bottom area.
If you want to repair the air flotation machine, first you need to repair and inspect the parts and connections, and repair some easily damaged parts. Further checks are needed on the grease, oil pipes, and oil level of the air flotation system, as well as on the connection of the lines. Regular oil replenishment and cleaning of oil stains are also necessary.