+86-510-88996388
enLanguage
Home / Knowledge / Details

Aug 12, 2024

Precautions for maintenance of flotation equipment

1. Safety first
Maintenance personnel must wear personal protective equipment, such as safety helmets, safety shoes, gloves, etc.
When performing electrical maintenance, be sure to cut off the power first and use an electrician to confirm that there is no electricity before operating.
2. Strictly follow the operating procedures
Maintenance should be carried out in accordance with the equipment's operating manual and maintenance guide, and maintenance steps and methods should not be changed at will.
3. Preparation of tools and spare parts
Ensure that the tools required for maintenance are complete and intact, such as wrenches, screwdrivers, detergents, etc.
Prepare sufficient common spare parts, such as seals, vulnerable mechanical parts, etc.
4. Cleaning and lubrication
During maintenance, pay attention to cleaning the key parts of the equipment to prevent dirt accumulation from affecting performance.
For moving parts, such as chains, bearings, etc., add an appropriate amount of lubricating oil or grease regularly.
5. Check electrical connections
Regularly tighten the electrical terminals to prevent looseness from causing poor contact or short circuit.
Check whether the outer sheath of the cable is damaged to avoid the risk of leakage.
6. Details of dissolved air system maintenance
The pressure of the dissolved air tank should be adjusted carefully to avoid excessive or low pressure.
When replacing the seal of the dissolved air pump, ensure that it is installed correctly to prevent leakage.
7. Observe the operating status
Start the equipment after maintenance and carefully observe its operating status, including whether the sound, vibration, temperature, etc. are normal.
8. Environmental protection
Waste generated during maintenance, such as waste oil, waste parts, etc., should be handled in accordance with environmental protection regulations to avoid polluting the environment.
9. Training and experience exchange
Maintenance personnel should receive relevant training regularly to improve their skills.
Encourage maintenance personnel to exchange experiences and jointly solve problems encountered in maintenance.
10. Combine regular maintenance with emergency maintenance
Develop a strict regular maintenance plan and execute it on time.
At the same time, for sudden equipment failures, it is necessary to respond quickly and perform emergency maintenance.

Send Message