The air flotation machine is a dissolved air system that produces a large number of fine air bubbles in the water, so that the air adheres to the suspended particles in the form of highly dispersed fine air bubbles, resulting in a state where the density is lower than that of water. -Water treatment equipment for liquid separation.
The purchase of air flotation machine is based on the condition of the incoming water source and the amount of treatment. However, there are many types of air flotation machines, such as: horizontal flow dissolved air flotation machine, vertical flow dissolved air flotation machine, shallow air flotation machine, vortex concave air flotation machine, etc., so consumers need to buy before buying. Learn how to choose an air flotation machine.
Generally speaking, the purchase of air flotation machine is to first determine which air flotation machine to use, and the air flotation technology, whether it is pressurized dissolved air flotation or vortex concave air flotation, and then, according to its specific Design, to carry out its selection considerations, so as to select the appropriate specifications and models. As for the latter one is pressure gauge, liquid level gauge and thermometer, etc. These factors can also play a certain role in the purchase of air flotation machines.
For the advective air flotation machine, the calculation of its processing capacity should be calculated according to the number of cubic meters per hour. As for why the advective air flotation machine is better than the vertical air flotation machine, this is because the vertical flow air flotation machine has a complex structure, the use effect is not very stable, and the cost is high, so in general, it is not as good as the advection air flotation machine. Air flotation machine.
In terms of application, the air flotation machine can be said to be very flexible, because it can be adjusted in position according to different purposes. For example, in preprocessing, it is usually after the conditioning pool and before the biochemical pool. But in advanced processing, it is usually behind the second biochemical tank, so its position can be changed.
