Maintenance and regular inspection of the flotation machine are crucial to its service life

During normal use, the air flotation machine needs to regularly check the water injection status of the water pump and air compressor and the lubrication status of the equipment. Regional scum and discharge water quality.
When adjusting flocculants, some parameters need to be paid attention to, such as adjustment. When using, prevent the dosing pipeline from clogging. Always observe the surface of the air flotation pool. If the scum surface is found to be uneven in the contact area, large bubbles or unstable water flow will occur.
If the scum surface of the air flotation machine is uneven, air bubbles often appear on the pool surface, causing bubbles and poor adhesion of flocs on the surface of the equipment. It should be checked promptly and mixed effectively during use. The blood coagulation system adjusts and appropriate actions are taken.
The air flotation device must frequently check the water level indicator tube of the dissolved air tank to control the equipment within a certain range so that the dissolved air effect can be effectively maintained to a certain extent and the air flotation phenomenon can be avoided to a certain extent. Due to the empty water level, a large amount of air rushes into the flotation tank, destroying the purification effect and scum layer.
Daily operation records of the air flotation machine should be kept every day, which effectively includes the dosage, water volume, dissolved air tank pressure, dissolved air volume, power consumption, slag discharge cycle, etc. The water temperature is too low in winter. Because the flocculation effect is not ideal, it is often necessary to increase the dosage.
The flotation device can effectively treat industrial wastewater containing a certain amount of foam. When the temperature of the water inlet device is too high, the foam particles in the device will become larger and more will be produced during use.